If you have a Star TSP100 Eco receipt printer and want to use it with your Mac computer, you will need to install the appropriate drivers first. The drivers allow your Mac to communicate with the printer and print receipts correctly. In this article, we will show you how to download and install the Star TSP100 Eco drivers for Mac in a few simple steps.
Step 1: Download the drivers
The first thing you need to do is to download the latest drivers for the Star TSP100 Eco printer from the official website. You can find them here[^1^]. Under the section Star Micronics TSP100 Series Driver Downloads, click on TSP100 futurePRNT Software. This will take you to a page where you can select your operating system and download the driver package. Choose macOS from the list and click on Download.
Step 2: Install the drivers
Once you have downloaded the driver package, open it and follow the instructions on the screen. You will need to agree to the license agreement and enter your administrator password. The installation process may take a few minutes, so please be patient. When it is done, restart your computer.
Step 3: Connect the printer
After restarting your computer, connect the printer to your Mac using the USB cable. Make sure the printer is turned on and has paper loaded. Then, go to System Preferences > Printers and Scanners and confirm that you can see the printer in the list. If not, click on the + button and add it manually.
Step 4: Configure the printer
Now that you have installed the drivers and connected the printer, you can configure some settings to optimize its performance. To do this, open your web browser and go to http://localhost:631/printers/. This will open a web interface where you can access the printer settings. Select your printer model (StarTSP100 etc.) and click on Set Default Options. Here, you can adjust some parameters such as media size, cash drawer control, print quality, etc. For example, you can set the media size to 72mm * 200mm, which is suitable for receipt printing. You can also enable or disable the cash drawer option if you have one attached to your printer. When you are done, click on Set Default Options again to save your changes.
Step 5: Test the printer
The final step is to test if your printer works properly with your Mac. To do this, go back to System Preferences > Printers and Scanners and select your printer. Then, click on Print Test Page and wait for a sample receipt to come out of your printer. If everything looks good, congratulations! You have successfully installed the Star TSP100 Eco drivers for Mac. You can now print receipts from any application that supports printing.
I hope this article was helpful for you. If you have any questions or issues with your printer, please contact Star Micronics support[^1^] or visit their FAQ page[^1^]. Thank you for reading! aa16f39245